New DX350LC-7 Stage V Excavator with D-ECOPOWER
Doosan has launched the new DX350LC-7 Stage V 36 tonne crawler excavator. The DX350LC-7 is the first Stage V model to feature Doosan’s innovative D-ECOPOWER technology, providing operators with higher productivity and lower fuel consumption per hour, as well as smoother controls.
Like the new DX300LC-7 30 tonne Stage V model launched earlier in 2019, the DX350LC-7 excavator builds on the very successful design of the previous Stage IV machine. As well as higher performance and cost savings, the new DX350LC-7 Stage V excavator provides major enhancements in operator comfort, uptime and return on investment, with a strong focus on low fuel consumption, increased power, robustness and versatility.
Doosan D-ECOPOWER Technology
The D-ECOPOWER technology focuses on the role of the hydraulics system and demonstrates Doosan’s continuous iteration of all the processes and components utilised in the company’s new generation products to achieve unprecedented levels of diesel energy efficiency.
Doosan’s D-ECOPOWER technology utilises an electronic pressure-controlled pump within a closed centre hydraulic system to accomplish increases of up to 26% in productivity and up to 12% in fuel consumption improvements, depending on the mode selected. A closed centred main control valve minimises pressure loss, while the electric pressure-controlled pump manages and optimises engine power more effectively.
The D-ECOPOWER system uses nine sensors to detect the amount of hydraulic oil necessary to accomplish a specific task and precisely meter the amount of oil required rather than continuously forcing a fixed amount of oil through the system, thereby improving efficiency. Software is utilised to electronically reproduce the full benefits of an open centre hydraulic system with very little energy loss. The hydraulic system and engine horsepower are fully optimised and synchronised, further reducing losses within the system.
Improved feedback to the operator through the joystick results in improved machine control and less operator fatigue. The acceleration and deceleration of the excavator workgroup functions are smoother, allowing operators to perform repetitive swinging and digging motions with less jerking movements.
New Generation Doosan DL08 Stage V Engine
To meet Stage V engine emission regulations, the new DX350LC-7 excavator is powered by the latest generation Doosan DL08 diesel engine, providing 209 kW of power at 1800 RPM.
The DL08 engine offers a new solution to exceed Stage V regulations without exhaust gas recirculation (EGR), that boosts the quantity of air available during combustion, increasing the temperature of the process and greatly reducing the amount of particulates produced. This is combined with super-efficient DOC/DPF+SCR after-treatment technology to ensure minimal emissions.
Thanks to the new technology, maintenance of the diesel particulate filter (DPF) has been greatly reduced, with no maintenance required until the machine has operated for 8000 hours.
With the DX350LC-7, Doosan has tried to ensure that productivity and environment protection are truly compatible. The enhanced fuel efficiency of the DL08 engine in combination with a new hydraulic main valve and the new generation SPC3 Smart Power Controls, provides overall fuel efficiency increases of +10% in the S mode and +6% in the P+ mode compared to the previous generation machine.
These are two in a range of four power modes now available on the DX350LC-7, which help to simplify the operation of the new excavator compared to the more complex choice of eight power modes and SPC combinations in the previous generation machine. The operator is able to set the power mode (P+, P, S or E) in both one-way and two-way working modes.
Increased Comfort and Controllability
Already excelling in spaciousness and ergonomics, the new cab in the DX350LC-7 model takes operator comfort and ease of operation to unheralded levels. As well as a new high quality seat, the enhanced cab offers more features as standard than other machines on the market, ensuring super controllability and high precision in all applications.
Key new features in the cab
- New 8-inch touch-enabled colour LCD gauge panel, providing more information via a 30% larger screen
- Stereo system integrated in the gauge panel
- Smart keyless start system (option)
- Improved interior cab design
- Ultrasonic sonic detection of obstacles (option)
- LED lights (option)
- Side protection (option)
- Air compressor (option)
As standard, 360° cameras provide full visibility around the excavator and allow the operator to see a top-down view of the area outside the machine. The camera array comprises a front camera, two side cameras and a rear camera. The camera display is separated from the gauge panel.
The new DX350LC-7 model is factory-installed with Doosan’s state-of-the-art DoosanConnect wireless fleet monitoring system. The DoosanConnect system offers a web-based fleet management solution which is very useful for monitoring the performance and security of machines and promoting preventative maintenance. It is available as a standard feature on all new Doosan excavators (from 14 tonne), all new Doosan wheel loaders and Doosan ADTs.