Page 40 - Hub-4 Magazine Issue 61
P. 40

  Quarrying
Convinced with the ease of operation and the stock-pile conveyor enables for additional product size, which hydrostatic drive adds to efficiency of the crushing process and being able to Hereford Quarries recycles
It was exactly in 2008 when AGM Nemec purchased their first
g
et t
he m
ost out
of t
he m
achi
ne. Re
liabl
en
etwo
rk and the
100% of inert waste with CDE
Rockster R900 track-mounted mobile impact crusher from the
reasons why R1100S stayed at the quarry for good. It will
authorized Rockster Dealer Skalar d.o.o.. “After a short testing
mainly crush dolomite with 0-500 input size for the purposes
period, we were convinced that the Rockster impact crusher with a hydrostatic drive and a low transport weight is exactly what we were looking for. From the aspect of our machine
of concrete production at the quarry. “It was very easy for us
wet processing plant
operators, the crusher is very easy to operate and thanks to
11 years. Our operator knows how easy it is to operate a
the large engine openings very simple to service and do all the necessary maintenance. It has been mostly used as a primary crusher in our quarry for processing dolomite - rather soft and abrasive rock - to sizes from 0/4, 4/8, 8/16, 16/32 as well as 32/x,” says Maja Gerčer Špitalar, Managing Director of AGM Nemec. She continues: “The R900 impactor was an important addition for the growth of our construction sector and it enabled us to take on other projects where crushing of asphalt or recycling of concrete on the spot was a must. I have to say that another reason why we acquired larger Rockster machine is because of the fast service provided by the Rockster dealer Skalar d.o.o. The parts were always delivered on time and great technical support just ads to a more fluid workflow.“
30% increased production and precisely defined cubical final product
crusher with a hydrostatic drive as well as how to fine tune the adjustment gap and get exact desired final material. Thanks to the intuitive, electrical control function on the multifunctional display, the set-up of the crushing gap adjustment, in comparison to R900, is even easier to define, which allows for precisely controlled size of the end-material. The Quick Start-Stop function and the vibrating chute with load-dependent speed control add to the efficiency of the machine and decrease setup- and downtime. With the additional screening system, it will enable us to broaden our services which means crushing and screening on-site. We will use the screen system mainly for production of 0-16 and 0-32 final product. Sporadically, the R1100S, will be required for recycling demolition debris such as reinforced concrete as well as asphalt,” says Mrs. Gerčer Špitalar.
Whether processing dolomite in a quarry, crushing asphalt for new roads or recycling concrete to be reused in future
very throughput of the larger crusher are exactly the two main
to decide since we have had Rockster impactor for more than
As the size of construction projects grew, the need for AGM Nemec to purchase a larger impactor was also needed in order to properly grow with the market needs. They pretty much took the same route through Rockster’s Slovenian dealer, however this time no testing was necessary. AGM Nemec purchased Rockster’s R1100S impact crusher and had it delivered straight to the quarry. The crusher is equipped with an optional hydraulically lowerable screen box and the double-functional return and/or stockpile belt. The impactor sure surprised with its output and the ability to screen and precisely define final end product. The hydraulically swiveled
buildings, the impact crusher R1100S is already a valuable addition to a wide range of services that the AGM Nemec is able to provide. “To grow together with our customers is a special feeling. When a company, with over 10 years of experience working with a Rockster machine, decides to purchase another crusher from us, it can’t get any better. This is not only a proof for us that the machines last long yet another confirmation to strive and deliver top products to all corners of the world, ” says Rockster’s Sales Manager & AO, Norbert Feichtinger.
R1100S – crushing and screening in
one pass was an important purchase criterion.
 | p40 |
www.hub-4.com March/April 2020 - Issue 61
    





























































   38   39   40   41   42