Making sand from glass
- 13 April 2011
- Company & Industry News
The production of sand by means of glass recycling is a developing market in
“We are in the development stages of releasing a high quality sand replacement product into the Victorian market and the TwisterTrac was an integral part of the crushing, screening and cleaning process that we have put together,” Alford explained.
Working in conjunction with other crushing equipment, the TwisterTrac produces two products at the moment, recycled sand of minus 10mm and recycled sand of minus 5mm.
According to Alford, the company is built around recycling and “at each stage of our company’s development, we had to believe in our products and push for their acceptance into the market place”.
The material used for making sand would normally have gone into landfill sites and Alex Fraser’s customers are slowly but surely accepting this product as the norm.
“It is now the case that recycled concrete is seen as an equivalent product to the virgin rock product it is competing with. Recycled sand has already met with considerable success as we recently delivered recycled sand to a large pipe line project where our product was compared favourably to the best pipe bedding sand from local sand quarries,” he explains.
Alford concluded by outlining the advantages of recycled sand for the
- Transport — the closest sand deposits are more than 50kms away whereas the glass recycling plants are situated not more than five kilometres away.
- Landfill — if we didn’t recycle the glass waste into sand it would be buried as landfill which is a bad outcome for the environment.
- Similarities — our recycled sand has all the physical characteristics of traditional quarried sand.
Pilot Crushtec export sales manager Paul Chappel explained that Alex Fraser first became interested in acquiring the TwisterTrac after company representatives were shown the mobile vertical shaft impact (VSI) crusher at the Bauma trade fair in 2010.
“At Bauma, we made arrangements that Alex Fraser hire a unit from an Australian dealer for a trial period. This proved successful as Alex Fraser was particularly impressed with the TwisterTrac’s ease of use and reliability,” Paul explained.
According to Paul, this experience showed Alex Fraser that there was only one option, to buy a TwisterTrac plant outright. Paul further explained that VSIs are definitely the way to go for this application.
“Due to a VSI’s impressive reduction ratio of up to 10:1, it is ideal for recycling glass into a sand product. Both our mobile TwisterTrac and our modular Twister AC210s have been used successfully in this application,” he explained.
Pilot Crushtec’s mobile TwisterTrac has a variable rotor speed of between 1 000 and 1 600 rpm and has a maximum feed size of 65mm for hard rock and 75mm for soft rock. The 1200mm wide discharge conveyor can offload to a height of 3,7 metres. While working, the TwisterTrac is about 14,5 metres in length, 3,2 metres wide and weighs 29 tons. Several rotor configurations provide throughput capacities between 100 and 225 tonnes per hour.
26 Yaldwyn Road
Witfield / Jet Park
T: +27 (11) 842 5600
F: +27 (11) 842 5610