Chilean order for Mogensen
- 02 October 2007
- Company & Industry News
Each Sizer-feeder combination will be equipped with product chutework, designed and supplied by Mogensen, to separate the screen products, as required. All machines are fully dust-proofed. The flexible, dust-proof inter-connections needed for the installation will also be supplied by Mogensen.
The first unit, equipped with integral product chutes, will be receiving feeds of roughly pre-screened quicklime (0.9t/m³), either nominally 6 - 15mm or 15 - 50mm at a rate of 200tph. Both feeds contain excess fines and oversize, and the aim of the sizing operation in each case is to produce a clean 6 - 19mm fraction, for which Inacesa has a high demand. The Sizer's top two decks will be removing the + 19mm material, saleable product will be collected from the bottom three decks and the fines will pass right through the machine. The second unit, which will be supplied with special, free-standing chutework, will be fed with 300tph of limestone (1.4t/m³). Again, two alternative, roughly pre-screened materials, 15 - 50mm and 6 - 15mm, will be fed to the Sizer with the aim of removing excess fines, -15mm or -6mm respectively. Clean 15 - 50mm stone will be taken from the top three decks of the Sizer in the case of the coarse feed, whereas in the case of the finer feed clean 6 - 15mm stone will be taken from all five decks. The product chute will be fitted with a Kinetrol, pneumatically controlled flap extending across the whole width of the Sizer to enable the operator easily to select the two alternative product streams without the need for mesh changes.
The 3-metre Sizers, Type S3056, are each powered by two Invicta Type BLz 60-105/6 rotary electric vibrators rated at 6200 watt. The spreader feeders, Type F 3005 C are fitted with two Invicta BLz 40-27/6 vibrators rated at 1800 watt.
Mogensen Raw Materials Handling
Lincolnshire NG31 7SF
Telephone: +44 (0)1476 566301
Fax: +44 (0)1476 590145